A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Ducato Boxer 51964374 0265244043
Vendors's code: 51964374
Product code: 0265244043
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
In stock
Ask about the product
ABS pump and control module Fiat Ducato Boxer 51964374 0265244043
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Fiat Ducato Boxer - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Fiat Ducato Boxer - numbers 51964374; 0 265 244 043 / 0265244043. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Ducato Boxer
When the ABS in the Fiat Ducato Boxer stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 51964374 - part number (OEM)
- 0 265 244 043 / 0265244043 - ABS pump number (Bosch)
- 0 265 956 214 / 0265956214 - ABS control module number (Bosch)
Application according to the listing
- Fiat Ducato Boxer - model
- Bosch - manufacturer
How an ABS pump with control module works
The module electronics store fault codes that can be read with a diagnostic tool. This makes it easier to determine whether the sensors, the wiring or the hydraulic unit itself is to blame.
Matching
Compare number 51964374 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
