A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Lancia 51924795 10020702384
Vendors's code: 51924795
Product code: 10097016153
Barcode:
Code 39:
ISBN:
£92.66
Price
£92.66
£113.97
Price
£113.97
In stock
Ask about the product
ABS pump and control module Fiat Lancia 51924795 10020702384
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.79
-
shipping
(Poland)
from
£22.79
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Fiat Lancia?
This is a used, working ABS pump with control module for the Fiat Lancia - numbers 51924795; 10.0207-0238.4 / 10020702384. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Lancia
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Fiat Lancia; it is used, working and in good condition.
Numbers to compare
- 51924795 - part number (OEM)
- 10.0207-0238.4 / 10020702384 - ABS pump number (ATE)
- 10.0970-1615.3 / 10097016153 - ABS control module number (ATE)
Application according to the listing
- Fiat Lancia - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
