A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Fiat Multipla 0265216959 0273004684
Vendors's code: 0265216959
Product code: E6EB-8587E
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Fiat Multipla?
This is a used, working ABS pump with control module for the Fiat Multipla - numbers 0 265 216 959 / 0265216959; 0 273 004 684 / 0273004684. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Fiat Multipla
In the Fiat Multipla (2001-2010), the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 0 265 216 959 / 0265216959 - ABS pump number (Bosch)
- 0 273 004 684 / 0273004684 - ABS control module number (Bosch)
Application according to the listing
- Fiat Multipla - model
- 2001-2010 - year
- Bosch - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.