A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Ford Fiesta ATE 8V512C405AE 06210214684 06210956723
Vendors's code: 06210214684
Product code: 8V512C405AE
Barcode:
Code 39:
ISBN:
731,71 zł
Price
731,71 zł
900,00 zł
Price
900,00 zł
Ask about the product
ABS pump Ford Fiesta ATE 8V512C405AE 06210214684 06210956723
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 8V512C405AE on an ABS pump mean?
ABS pump 8V512C405AE complete with control unit, used and inspected. Compare the numbers with the original in your car.
Is ABS pump 8V512C405AE the right part for your Ford?
If the ABS warning light is on in your Ford Fiesta, one possible cause is the hydraulic module or its control unit. ABS pump 8V512C405AE is a used original part, inspected before sale. According to the listing, the pump comes from the Ford Fiesta model.
Numbers and markings on the ABS pump
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 8V512C405AE, original Ford number,
- 06.2102-1468.4 (catalogue format: 06210214684), hydraulic block manufacturer's number,
- 06.2109-5672.3 (catalogue format: 06210956723), control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
Symptoms of a faulty ABS pump or control unit
- the ABS warning light comes on after the engine is started and stays on,
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| Does a lit ABS warning light always mean a faulty pump? |
|---|
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Who makes this module? |
| The module is made by ATE. The manufacturer's name does not change the numbers you should use to match the part. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
