A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Fiesta AV592C405EA 10096101613
Vendors's code: AV592C405EA
Product code: 10096101613
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Ford Fiesta?
This is a used, working ABS pump with control module for the Ford Fiesta - numbers AV59-2C405-EA / AV592C405EA; 10.0961-0161.3 / 10096101613. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Fiesta
A used ABS pump is a way to repair the braking system without buying a new, expensive part. This listing applies to: Ford Fiesta; the unit is working and in good condition.
Numbers to compare
- AV59-2C405-EA / AV592C405EA - part number (OEM)
- 10.0961-0161.3 / 10096101613 - ABS control module number (ATE)
Application according to the listing
- Ford Fiesta - model
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number AV59-2C405-EA also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.