A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus 2M512C285AF 10020404034
Vendors's code: 2M512C285AF
Product code: 10092501203
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
In stock
Ask about the product
ABS pump and control module Ford Focus 2M512C285AF 10020404034
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Ford Focus?
This is a used, working ABS pump with control module for the Ford Focus - numbers 2M51-2C285-AF / 2M512C285AF; 10.0204-0403.4 / 10020404034. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus
When the ABS in the Ford Focus stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 2M51-2C285-AF / 2M512C285AF - part number (OEM)
- 10.0204-0403.4 / 10020404034 - ABS pump number (ATE)
- 10.0925-0120.3 / 10092501203 - ABS control module number (ATE)
Application according to the listing
- Ford Focus - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
