A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford Focus 6M5Y2C405AD 10020603214
Vendors's code: 6M5Y2C405AD
Product code: B61E-2867B
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump and control module Ford Focus 6M5Y2C405AD 10020603214
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Ford Focus?
This is a used, working ABS pump with control module for the Ford Focus - numbers 6M5Y-2C405-AD / 6M5Y2C405AD; 10.0206-0321.4 / 10020603214. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford Focus
According to the listing, this hydraulic unit with electronics fits the Ford Focus (2006). It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 6M5Y-2C405-AD / 6M5Y2C405AD - part number (OEM)
- 10.0206-0321.4 / 10020603214 - ABS pump number (ATE)
- 10.0960-0126.3 / 10096001263 - ABS control module number (ATE)
- 28.5600-0402.3 / 28560004023 - ABS control module number (ATE)
Application according to the listing
- Ford Focus - model
- 2006 - year
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model and year alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
