A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Ford KG9C2B373BC KG9C2C219BC
Vendors's code: KG9C2B373BC
Product code: KG9C2C219BC
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
In stock
Ask about the product
ABS pump and control module Ford KG9C2B373BC KG9C2C219BC
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Ford?
This is a used, working ABS pump with control module for the Ford - numbers KG9C-2B373-BC / KG9C2B373BC; KG9C-2C219-BC / KG9C2C219BC. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Ford
According to the listing, this hydraulic unit with electronics fits the Ford. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- KG9C-2B373-BC / KG9C2B373BC - part number (OEM)
- KG9C-2C219-BC / KG9C2C219BC - part number (OEM)
Application according to the listing
- Ford - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
