A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Iveco Daily 504182314 0265233027
Vendors's code: 504182314
Product code: D366-37589
Barcode:
Code 39:
ISBN:
$946.17
Price
$946.17
$1,163.79
Price
$1,163.79
Ask about the product
ABS pump and control module Iveco Daily 504182314 0265233027
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.36
-
shipping
(Poland)
from
$30.36
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 504182314 fit your car?
This is a used, working ABS pump with control module for the Iveco Daily - numbers 504182314; 0265233027. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Iveco Daily
An ABS pump with control module is one of the key active safety components. This listing applies to: Iveco Daily; the part is used, working and in good condition.
Numbers to compare
- 504182314 - part number (OEM)
- 0265233027 - ABS pump number (Bosch)
- 0265900344 - ABS control module number (Bosch)
Application according to the listing
- Iveco Daily - model
- Bosch - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
Compare number 504182314 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- ABS does not react to wheel slip,
- ESP or ASR does not switch on,
- power supply faults in the diagnostic memory,
- signs of corrosion are visible on the connector.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
