A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Jeep 68532850AC
Vendors's code: 68532850AC
Product code: ABS_68532850AC
Barcode:
Code 39:
ISBN:
€569.11
Price
€569.11
€700.00
Price
€700.00
Ask about the product
ABS pump and control module Jeep 68532850AC
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Number 68532850AC on your label? See the details
An original ABS pump with control module for a Jeep, used and working. One part number (OEM). We do not state the model.
Jeep: ABS unit with part number 68532850AC
‘Is this unit the right choice for my car?’ The number will answer that. This Jeep part has part number (OEM) 68532850AC. We do not state the model. If the number on your part is identical, you can go ahead. The unit is used, working and original.
Unit number
- 68532850AC - part number (OEM): 68532850AC
The number has eight digits and two letters. The final letters may indicate the variant, so do not skip them. If you cannot get to the label, ask your garage to help read it. We do not define the role of the number.
How the problem usually starts
Most often with one of these symptoms:
- the ABS warning light after hitting a kerb,
- incorrect ABS operation on one axle,
- a valve fault in the hydraulic module,
- the control module does not wake up when the ignition is switched on.
After hitting a kerb, first inspect the wheel speed sensor and the reluctor ring. Check the cable. Read the faults and clear them. If they come back and point to the unit, compare the number. After the replacement, bleed the brakes and ask about configuration.
Questions and answers
| Can I order using the number alone? |
|---|
| Yes, if 68532850AC matches your part character for character. |
| I cannot make out the label. What should I do? |
| Ask your garage to read it or take a photo. Then send it to us. |
| Are different letters at the end a problem? |
| They can be. Write to us before you place an order. |
| Which model is the part for? |
| We do not state the model. Selection is by part number. |
Send us the number as written on your part. We will reply to say whether it matches this listing.
