The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Mercedes Bosch A0034318712 0265202444
Vendors's code: A0034318712
Product code: 0265202444
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
Ask about the product
ABS pump Mercedes Bosch A0034318712 0265202444
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number A0034318712 on Mercedes ABS pumps
ABS pump A0034318712 complete with control unit, used and inspected. Compare the numbers with the original in your car.
Used Mercedes ABS pump with number A0034318712
This module is made by Bosch. ABS pump A0034318712 is sold together with its control unit, just as it is fitted to Mercedes cars. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number A0034318712 and related numbers
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- A 003 431 87 12 (catalogue format: A0034318712), Mercedes number stamped on the hydraulic block,
- 0 265 202 444 (catalogue format: 0265202444), hydraulic block manufacturer's number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
What can point to an ABS pump failure
- the ABS stops working, although basic braking usually remains functional,
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| What is the difference between numbers A0034318712 and 0265202444? |
|---|
| One of the numbers is stamped on the hydraulic block, while the other comes from the module manufacturer or from the control unit sticker. When matching the part, compare all the numbers. |
| Where do I find number A0034318712 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
