A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mercedes-Benz A1724313712 A1729014000
Vendors's code: A1724313712
Product code: 10021208534
Barcode:
Code 39:
ISBN:
813,01 zł
Price
813,01 zł
1 000,00 zł
Price
1 000,00 zł
In stock
Ask about the product
ABS pump and control module Mercedes-Benz A1724313712 A1729014000
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Mercedes-Benz?
This is a used, working ABS pump with control module for the Mercedes-Benz - numbers A 172 431 37 12 / A1724313712; A1729014000. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mercedes-Benz
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Mercedes-Benz. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- A 172 431 37 12 / A1724313712 - part number (OEM)
- A1729014000 - part number (OEM)
- 10.0212-0853.4 / 10021208534 - ABS pump number (ATE)
Application according to the listing
- Mercedes-Benz - model
- ATE - manufacturer
How an ABS pump with control module works
In cars with ESP or traction control, the same module can also build up pressure at a selected wheel to stabilise the vehicle. The range of functions depends on the equipment of the specific car.
Matching
The number A 172 431 37 12 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
