A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mercedes-Benz A2044312412 A2045455332
Vendors's code: A2045455332
Product code: A2044312412
Barcode:
Code 39:
ISBN:
1 138,21 zł
Price
1 138,21 zł
1 400,00 zł
Price
1 400,00 zł
In stock
Ask about the product
ABS pump and control module Mercedes-Benz A2044312412 A2045455332
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Mercedes-Benz - what to check before buying?
This is a used, working ABS pump with control module for the Mercedes-Benz - numbers A2044312412; A2045455332. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mercedes-Benz
According to the listing, this hydraulic unit with electronics fits the Mercedes-Benz. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- A2044312412 - part number (OEM)
- A2045455332 - part number (OEM)
- 10.0212-0201-4 / 10021202014 - ABS pump number (ATE)
Application according to the listing
- Mercedes-Benz - model
- ATE - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
Customers Also Viewed
-
Price 1 600,00 złPrice 1 300,81 zł
-
Price 1 400,00 złPrice 1 138,21 zł
