The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Mercedes Bosch 0265258038 0265956939 A1779007805
Vendors's code: 0265258038
Product code: A1779007805
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
Ask about the product
ABS pump Mercedes Bosch 0265258038 0265956939 A1779007805
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 0265258038 come complete with the control unit?
Used ABS pump with control unit, number 0265258038, inspected before sale. Matched by the numbers on the block and sticker.
Used Mercedes ABS pump with number 0265258038
This is a used original ABS pump with a control unit for Mercedes cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 0265258038, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number 0265258038 and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- 0 265 258 038 (catalogue format: 0265258038), hydraulic block manufacturer's number,
- 0 265 956 939 (catalogue format: 0265956939), control unit number,
- A 177 900 78 05 (catalogue format: A1779007805), Mercedes control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
What ABS problems can point to
- the ABS stops working, although basic braking usually remains functional,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| What is the difference between numbers 0265258038 and 0265956939? |
|---|
| One of the numbers is stamped on the hydraulic block, while the other comes from the module manufacturer or from the control unit sticker. When matching the part, compare all the numbers. |
| Where do I find number 0265258038 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Who makes this module? |
| The module is made by Bosch. The manufacturer's name does not change the numbers you should use to match the part. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
