A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Mercedes Vito Viano Bosch A0014461489 0265235167 0265950599
Vendors's code: A0014461489
Product code: 0265950599
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number A0014461489 on Mercedes ABS pumps
ABS pump A0014461489 complete with control unit, used and inspected. Compare the numbers with the original in your car.
Is ABS pump A0014461489 the right part for your Mercedes?
This is a used original ABS pump with a control unit for Mercedes Vito Viano cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is A0014461489, and the other numbers from the labels are listed below. According to the listing, the pump comes from the Mercedes Vito Viano model.
Part number A0014461489 and related numbers
The numbers from the listing, as written on the labels and as a single string:
- A 001 446 14 89 (catalogue format: A0014461489), Mercedes number stamped on the hydraulic block,
- 0 265 235 167 (catalogue format: 0265235167), hydraulic block manufacturer's number,
- 0 265 950 599 (catalogue format: 0265950599), control unit number.
Matching by number is more reliable than matching by car model. Compare all the numbers and ask us if any of them does not match.
When an ABS module needs replacing
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| What is the difference between numbers A0014461489 and 0265235167? |
|---|
| One of the numbers is stamped on the hydraulic block, while the other comes from the module manufacturer or from the control unit sticker. When matching the part, compare all the numbers. |
| Where do I find number A0014461489 on my pump? |
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.