A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mini Cooper R56 3451685854201 6858543
Vendors's code: 3451685854201
Product code: A315-1327B
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
Ask about the product
ABS pump and control module Mini Cooper R56 3451685854201 6858543
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Mini Cooper R56?
This is a used, working ABS pump with control module for the Mini Cooper R56 - numbers 3451 6858542 01 / 3451685854201; 6858543. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mini Cooper R56
This ABS pump with control module is intended for: Mini Cooper R56 (2013). It is a used, working part in good technical condition.
Numbers to compare
- 3451 6858542 01 / 3451685854201 - part number (OEM)
- 6858543 - part number (OEM)
- 17723708 - part number (OEM)
- 54086364A - part number (OEM)
- 18186311A - part number (OEM)
Application according to the listing
- Mini Cooper R56 - model
- 2013 - year
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
Compare number 3451 6858542 01 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model and year alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Not sure? Send a photo of your module to contact@auto24parts.com - we will check it for you.
