A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Mitsubishi 4670B711 06210987923
Vendors's code: 4670B711
Product code: 06210987923
Barcode:
Code 39:
ISBN:
£154.16
Price
£154.16
£189.62
Price
£189.62
In stock
Ask about the product
ABS pump and control module Mitsubishi 4670B711 06210987923
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.75
-
shipping
(Poland)
from
£22.75
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Mitsubishi?
This is a used, working ABS pump with control module for the Mitsubishi - numbers 4670B711; 06.2109-8792.3 / 06210987923. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Mitsubishi
According to the listing, this hydraulic unit with electronics fits the Mitsubishi. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 4670B711 - part number (OEM)
- 06.2109-8792.3 / 06210987923 - ABS control module number (ATE)
Application according to the listing
- Mitsubishi - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
