A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan 476606UC0C 0265298849
Vendors's code: 476606UC0C
Product code: 0265957440
Barcode:
Code 39:
ISBN:
€243.90
Price
€243.90
€300.00
Price
€300.00
In stock
Ask about the product
ABS pump and control module Nissan 476606UC0C 0265298849
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS pump fit the Nissan?
This is a used, working ABS pump with control module for the Nissan - numbers 476606UC0C; 0265298849. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan
This ABS pump with control module is intended for: Nissan. It is a used, working part in good technical condition.
Numbers to compare
- 476606UC0C - part number (OEM)
- 0265298849 - ABS pump number (Bosch)
- 0265957440 - ABS control module number (Bosch)
Application according to the listing
- Nissan - model
- Bosch - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
