A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Nissan Murano 47660CB670 06210201504
Vendors's code: 47660CB670
Product code: 06210903163
Barcode:
Code 39:
ISBN:
€121.95
Price
€121.95
€150.00
Price
€150.00
Ask about the product
ABS pump and control module Nissan Murano 47660CB670 06210201504
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Nissan Murano?
This is a used, working ABS pump with control module for the Nissan Murano - numbers 47660 CB670 / 47660CB670; 06.2102-0150.4 / 06210201504. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Nissan Murano
When the ABS in the Nissan Murano stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 47660 CB670 / 47660CB670 - part number (OEM)
- 06.2102-0150.4 / 06210201504 - ABS pump number (ATE)
- 06.2109-0316.3 / 06210903163 - ABS control module number (ATE)
Application according to the listing
- Nissan Murano - model
- ATE - manufacturer
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
Compare number 47660 CB670 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
