A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Opel ATE 13412552 10096145433
Vendors's code: 100961-45433
Product code: B0DD-85822
Barcode:
Code 39:
ISBN:
813,01 zł
Price
813,01 zł
1 000,00 zł
Price
1 000,00 zł
Ask about the product
ABS pump Opel ATE 13412552 10096145433
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 13412552 on an ABS pump mean?
Used original ABS module with number 13412552 for Opel. Confirm compatibility with the number from your original pump.
Is ABS pump 13412552 the right part for your Opel?
This is a used original ABS pump with a control unit for Opel cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is 13412552, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers. The listing gives the markings AJB. They help tell the module versions apart, but the full part number is what decides compatibility.
Where to find the numbers on an ABS pump
The numbers from the listing, as written on the labels and as a single string:
- 13412552, original Opel number,
- 10.0961-4543.3 (catalogue format: 10096145433), control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
Symptoms of a faulty ABS pump or control unit
- the brake pedal pulses or feels uneven for no obvious reason,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS switches itself off shortly after the engine is started,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Which car model does this pump fit? |
|---|
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| What do the markings AJB in the listing mean? |
| They are markings of the module version or type. They help tell the units apart, but the full part number is what decides compatibility. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
