A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel 13435691 0265243662
Vendors's code: 13435691
Product code: 0265956075
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
Ask about the product
ABS pump and control module Opel 13435691 0265243662
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 13435691 fit your car?
This is a used, working ABS pump with control module for the Opel - numbers 13435691; 0265243662. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel
According to the listing, this hydraulic unit with electronics fits the Opel. It is a used, working part in good condition - choose it by the numbers in the list.
Numbers to compare
- 13435691 - part number (OEM)
- 0265243662 - ABS pump number (Bosch)
- 0265956075 - ABS control module number (Bosch)
Application according to the listing
- Opel - model
- Bosch - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Before buying, make sure the cause is not the power supply or the wiring loom, and only then replace the module.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
