A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Antara Chevrolet Captiva 25943362 28526207013
Vendors's code: 25943362
Product code: 28526207013
Barcode:
Code 39:
ISBN:
$330.82
Price
$330.82
$406.91
Price
$406.91
In stock
Ask about the product
ABS pump and control module Opel Antara Chevrolet Captiva 25943362 28526207013
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.52
-
shipping
(Poland)
from
$30.52
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Opel Antara Chevrolet Captiva?
This is a used, working ABS pump with control module for the Opel Antara Chevrolet Captiva - numbers 25943362; 28.5262-0701.3 / 28526207013. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Antara Chevrolet Captiva
If the ABS warning light is on in your Opel Antara Chevrolet Captiva or the brake system reports faults, the pump with control module may be the cause. We sell a used, working unit in good condition.
Numbers to compare
- 25943362 - part number (OEM)
- 28.5262-0701.3 / 28526207013 - ABS control module number (ATE)
Application according to the listing
- Opel Antara Chevrolet Captiva - model
- ATE - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. This listing covers the set described in the name, i.e. the ABS pump with control module. We will confirm the details of the set on request.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
