A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vectra B 90576560 13216601
Vendors's code: S108196002L
Product code: 90576560
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS pump and control module Opel Vectra B 90576560 13216601
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Opel Vectra B - what to check before buying?
This is a used, working ABS pump with control module for the Opel Vectra B - numbers 90.576.560 / 90576560; 13216601. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vectra B
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Opel Vectra B (1999-2002). Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 90.576.560 / 90576560 - part number (OEM)
- 13216601 - part number (OEM)
- 13091801 - part number (OEM)
- S108196002 L / S108196002L - part number (OEM)
Application according to the listing
- Opel Vectra B - model
- 1999-2002 - year
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. Car versions differ in, among other things, ESP, brake type and engine. Compare the numbers with your pump or with the vehicle documents.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
Customers Also Viewed
-
Price €150.00Price €121.95
