A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vectra C Signum 13191182 15052201
Vendors's code: 13191182
Product code: 54084733C
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Opel Vectra C Signum 13191182 15052201
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Opel Vectra C Signum - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Opel Vectra C Signum - numbers 13191182; 15052201. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vectra C Signum
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Opel Vectra C Signum. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 13191182 - part number (OEM)
- 15052201 - part number (OEM)
- 15113901 - part number (OEM)
- 54084733C - part number (OEM)
Application according to the listing
- Opel Vectra C Signum - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. Modules differ, among other things, in the layout of the brake line ports and the connector. Always compare the numbers and the appearance of your pump with the unit in the listing.
Symptoms of a faulty ABS pump
- valve fault codes appear,
- the ABS works unevenly,
- the warning light stays on even after a sensor replacement,
- the module stops responding after moisture gets in.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
