A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 306 Citroen Xsara 9636084480 0265216722
Vendors's code: 9636084480
Product code: 6FB8-44104
Barcode:
Code 39:
ISBN:
227,64 zł
Price
227,64 zł
280,00 zł
Price
280,00 zł
In stock
Ask about the product
ABS pump and control module Peugeot 306 Citroen Xsara 9636084480 0265216722
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Peugeot 306 Citroen Xsara - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Peugeot 306 Citroen Xsara - numbers 96 360 844 80 / 9636084480; 0 265 216 722 / 0265216722. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot 306 Citroen Xsara
This ABS pump with control module is intended for: Peugeot 306 Citroen Xsara. It is a used, working part in good technical condition.
Numbers to compare
- 96 360 844 80 / 9636084480 - part number (OEM)
- 0 265 216 722 / 0265216722 - ABS pump number (Bosch)
- 0 273 004 440 / 0273004440 - ABS control module number (Bosch)
Application according to the listing
- Peugeot 306 Citroen Xsara - model
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 96 360 844 80 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. Module numbers are written with spaces or as one string. We give both forms to make the part easier to find.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
