A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Peugeot 9822873580 0265258366
Vendors's code: 9822873580
Product code: 0265956416
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
In stock
Ask about the product
ABS pump and control module Peugeot 9822873580 0265258366
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Peugeot?
This is a used, working ABS pump with control module for the Peugeot - numbers 9822873580; 0265258366. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Peugeot
An ABS pump with control module is the hydraulic unit of the brake system combined with a control module that analyses signals from the wheel sensors and controls the pressure in the brake circuits. This listing applies to: Peugeot. The part is used, working and in good condition.
Numbers to compare
- 9822873580 - part number (OEM)
- 0265258366 - ABS pump number (Bosch)
- 0265956416 - ABS control module number (Bosch)
Application according to the listing
- Peugeot - model
- Bosch - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Start by checking the fuse and connectors; replace the pump only when the wiring and sensors are in working order.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Can I fit a pump from a different equipment version? |
| We do not assume so. Modules differ in functions (ABS, ESP, ASR) and software, so compare the numbers and the version of your car. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.
Customers Also Viewed
-
Price €300.00Price €243.90
