Skip to main content
In English +48 792 797 344 Polski +48 501 409 435 +48 32 201 72 96 En Español +34 63 727 27 85 contact@auto24parts.com
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Wishlist
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Renault 476605JN0A 06210981313
  • ABS pump and control module Renault 476605JN0A 06210981313
  • ABS pump and control module Renault 476605JN0A 06210981313 - photo 2
  • Part Type ABS pump with control module
  • Vehicle Make and Model Renault
  • OEM Part Number 476605JN0A
  • ABS Pump Part Number 06.2109-8131.3 / 06210981313
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
Ate
with VAT without VAT
Price 1 400,00 zł
PLN GBP EUR USD
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price

PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Renault
  • OEM Part Number 476605JN0A
  • ABS Pump Part Number 06.2109-8131.3 / 06210981313
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

Is 476605JN0A the number you need for your Renault?

Used, working, genuine ABS pump with control module. Two part numbers (OEM), no model.

Go to full description

Renault ABS unit: 476605JN0A and 06.2109-8131.3

The make in this offer is Renault. Two part numbers (OEM) give the full picture: 476605JN0A and 06.2109-8131.3. The unit is used, working and genuine. No model is given, so the only help is a match of the numbers, read character by character.

Both items in the offer

  • 476605JN0A - part number (OEM): 476605JN0A
  • 06210981313 - part number (OEM): 06.2109-8131.3

Number 06.2109-8131.3 contains dots and a hyphen. On the part it may be written without them. It is the same combination of digits. We leave the role of the numbers open.

Reasons for searching

Questions about a unit like this come from:

  • an ABS light visible after starting,
  • a pump fault in the tester read-out,
  • a control module that does not establish communication,
  • a complete loss of ABS function.

Do not assume straight away that the unit is at fault. Go through the connectors, fuses and speed sensors, and then the fault log. Bleed the system after replacement. Ask a mechanic whether adaptation is needed.

Before you decide

How do I read 476605JN0A?
Character by character. It contains the letters J, N and A, which are easy to mistake for digits.
What is 06.2109-8131.3?
It is a part number (OEM) from the offer, written the way we give it.
Which car?
All we know is that the make is Renault. We do not state the model.
I have one number. What next?
Write to us. We will help check the second.

Send both numbers. We will check them against the offer.

Latest Articles
See All

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more

  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more

  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more

  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more

  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more

  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more