A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault 5010457624 0265219510
Vendors's code: 5010457624
Product code: C510-307B2
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 5010457624 fit your car?
This is a used, working ABS pump with control module for the Renault - numbers 5010457624; 0265219510. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault
In the Renault, the hydraulic unit with control module decides when and how much to reduce the pressure in the brakes of individual wheels. We sell a used, working unit in good condition.
Numbers to compare
- 5010457624 - part number (OEM)
- 0265219510 - ABS pump number (Bosch)
- 0273004698 - ABS control module number (Bosch)
Application according to the listing
- Renault - model
- Bosch - manufacturer
How an ABS pump with control module works
The hydraulic unit contains solenoid valves and a return pump motor. When the control module detects a wheel locking, the valves briefly reduce the pressure in its circuit and the pump returns the fluid, so the driver keeps control of the car's path.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.