A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault Laguna 8200053422B P5CT2AAY1
Vendors's code: 8200053422B
Product code: 10096014313
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Renault Laguna - what to check before buying?
This is a used, working ABS pump with control module for the Renault Laguna - numbers 8200 053 422 B / 8200053422B; P5CT2AAY1. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault Laguna
The set in this listing (ABS pump and control module) runs the anti-lock braking system in: Renault Laguna. Match it by the numbers in the list. It is used, working and in good condition.
Numbers to compare
- 8200 053 422 B / 8200053422B - part number (OEM)
- P5CT2AAY1 - part number (OEM)
- 10.0206-0167.4 / 10020601674 - ABS pump number (ATE)
- 10.0960-1431.3 / 10096014313 - ABS control module number (ATE)
Application according to the listing
- Renault Laguna - model
- ATE - manufacturer
How an ABS pump with control module works
The module is connected by brake lines to the master cylinder and to the wheel circuits. That is why cleanliness must be maintained during replacement and the system must be bled thoroughly.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The brake system is critical for safety, so fitting is best left to a workshop that will bleed the brakes and check ABS operation.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.