A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Renault Modus 8200701498 0265234618
Vendors's code: 8200701498
Product code: 0265950338
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the pump with control module 8200701498 fit your car?
This is a used, working ABS pump with control module for the Renault Modus - numbers 8200701498; 0 265 234 618 / 0265234618. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Renault Modus
When the ABS in the Renault Modus stops working, the pump module with its control unit is often to blame. We offer a used, working unit in good condition.
Numbers to compare
- 8200701498 - part number (OEM)
- 0 265 234 618 / 0265234618 - ABS pump number (Bosch)
- 0 265 950 338 / 0265950338 - ABS control module number (Bosch)
Application according to the listing
- Renault Modus - model
- Bosch - manufacturer
How an ABS pump with control module works
During normal driving the system is passive and the brakes work conventionally. Only under hard braking does the pump start to pulse, and you can feel vibrations in the brake pedal.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.