A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Seat Skoda Volkswagen 3A0907379 5WK8411
Vendors's code: 10094603003
Product code: 10020400174
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you choose an ABS pump for the Seat Skoda Volkswagen?
This is a used, working ABS pump with control module for the Seat Skoda Volkswagen - numbers 3A0 907 379 / 3A0907379; 5WK8 411 / 5WK8411. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Seat Skoda Volkswagen
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Seat Skoda Volkswagen; it is used, working and in good condition.
Numbers to compare
- 3A0 907 379 / 3A0907379 - part number (OEM)
- 5WK8 411 / 5WK8411 - part number (OEM)
- 10.0204-0017.4 / 10020400174 - ABS pump number (ATE)
- 10.0946-0300.3 / 10094603003 - ABS control module number (ATE)
Application according to the listing
- Seat Skoda Volkswagen - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
The number 3A0 907 379 also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| Is the part new? |
|---|
| The pump is used, but in working order. You will find its condition in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| Where does this part come from? |
| The pump is used and comes from a dismantled vehicle. We give the manufacturer and OEM numbers in the description so that you can compare them. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.