A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Swift 62J1 BE 2WD / 06210205644
Vendors's code: 62J1BE2WD
Product code: 06210908123
Barcode:
Code 39:
ISBN:
$204.91
Price
$204.91
$252.04
Price
$252.04
In stock
Ask about the product
ABS pump and control module Suzuki Swift 62J1 BE 2WD / 06210205644
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
$30.24
-
shipping
(Poland)
from
$30.24
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Suzuki Swift - what to check before buying?
This is a used, working ABS pump with control module for the Suzuki Swift - numbers 62J1 BE 2WD / 62J1BE2WD; 06.2102-0564.4 / 06210205644. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki Swift
An ABS pump with control module is one of the key active safety components. This listing applies to: Suzuki Swift (1999-2014); the part is used, working and in good condition.
Numbers to compare
- 62J1 BE 2WD / 62J1BE2WD - part number (OEM)
- 06.2102-0564.4 / 06210205644 - ABS pump number (ATE)
- 06.2109-0812.3 / 06210908123 - ABS control module number (ATE)
Application according to the listing
- Suzuki Swift - model
- 1999-2014 - year
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
It is worth reading the fault codes with a diagnostic tool first, because some ABS faults come from wheel sensors or wiring, not from the hydraulic unit itself.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
