A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Swift 73K1 BE 2WD / 06210210394
Vendors's code: 73K1BE2WD
Product code: 06210952323
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Suzuki Swift - what to check before buying?
This is a used, working ABS pump with control module for the Suzuki Swift - numbers 73K1 BE 2WD / 73K1BE2WD; 06.2102-1039.4 / 06210210394. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki Swift
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Suzuki Swift (2008-2010); it is used, working and in good condition.
Numbers to compare
- 73K1 BE 2WD / 73K1BE2WD - part number (OEM)
- 06.2102-1039.4 / 06210210394 - ABS pump number (ATE)
- 06.2109-5232.3 / 06210952323 - ABS control module number (ATE)
- 28.5700-2401.3 / 28570024013 - ABS control module number (ATE)
Application according to the listing
- Suzuki Swift - model
- 2008-2010 - year
- ATE - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
The number 73K1 BE 2WD also appears in another listing. Compare all the numbers with the label on your pump - we do not assume that listings are interchangeable. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.