A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki SX4 Fiat 5611079J10 0265231670
Vendors's code: 5611079J10
Product code: 0265800494
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Suzuki SX4 Fiat - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Suzuki SX4 Fiat - numbers 56110-79J10 / 5611079J10; 0 265 231 670 / 0265231670. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Suzuki SX4 Fiat
Looking for a replacement for a faulty ABS pump for the Suzuki SX4 Fiat? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 56110-79J10 / 5611079J10 - part number (OEM)
- 0 265 231 670 / 0265231670 - ABS pump number (Bosch)
- 0 265 800 494 / 0265800494 - ABS control module number (Bosch)
Application according to the listing
- Suzuki SX4 Fiat - model
- Bosch - manufacturer
How an ABS pump with control module works
The control module receives signals from the wheel speed sensors and compares them. When one wheel slows down faster than the others, it controls the valves in the hydraulic block to prevent it from locking.
Matching
Compare number 56110-79J10 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The same car model may have had several module versions, depending on drive, equipment and year. The numbers in the list help to tell these versions apart.
Symptoms of a faulty ABS pump
- a return pump fault is stored in the control module memory,
- ABS activates unnecessarily on a dry road surface,
- the ABS and ESP warning lights come on together,
- a pump supply voltage fault appears.
Check the level and condition of the brake fluid; old or contaminated fluid accelerates wear of the valves in the hydraulic unit.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Can I drive with the ABS warning light on? |
| Usually the car still brakes without ABS assistance, but the wheels can lock and ESP will not work. The repair should be done as soon as possible. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
Write to contact@auto24parts.com with the model, year and the number from your pump - we will check the fit.