A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Toyota 445400DA60 0265298647 0265957117
Vendors's code: 445400DA60
Product code: 0265957117
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump and control module Toyota 445400DA60 0265298647 0265957117
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the ABS pump will fit the Toyota?
This is a used, working ABS pump with control module for the Toyota - numbers 445400DA60 / 44540-0DA60; 0265298647 / 0 265 298 647; 0265957117 / 0 265 957 117. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Toyota
An ABS pump with control module is one of the key active safety components. This listing applies to: Toyota; the part is used, working and in good condition.
Numbers to compare
- 445400DA60 / 44540-0DA60 - part number (OEM)
- 0265298647 / 0 265 298 647 - ABS pump number (Bosch)
- 0265957117 / 0 265 957 117 - ABS control module number (Bosch)
Application according to the listing
- Toyota - model
- Bosch - manufacturer
How an ABS pump with control module works
The return pump motor runs only when ABS is active. The rest of the time it puts no load on the electrical system, but together with the valves it is one of the parts most exposed to wear.
Matching
You will find Toyota number 44540-0DA60 on the module label; Bosch marked the pump with number 0265298647 and the control module with 0265957117. Compare the Toyota number above all and treat the Bosch numbers as confirmation.
Symptoms of a faulty ABS pump
- the ABS warning light comes on straight after starting the engine,
- the diagnostic tester cannot connect to the module,
- the speedometer shows incorrect readings,
- the system works only intermittently.
Before you buy a pump, check the fuse, power supply, earth and wheel speed sensors - a damaged wiring loom or sensor can cause similar symptoms.
Questions and answers
| What should I check on delivery? |
|---|
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| How can I check whether the pump will fit my car? |
| Compare the model, year and the numbers on the module fitted in your car with the numbers in the description. You can also send us a photo. |
| Is the control module included? |
| Yes, the listing covers the ABS pump together with the control module, as stated in the name. If you want to confirm the details of the set, write to us before buying. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
