A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Toyota C-HR 4451047070 11304041030
Vendors's code: 4451047070
Product code: 11304041030
Barcode:
Code 39:
ISBN:
569,11 zł
Price
569,11 zł
700,00 zł
Price
700,00 zł
Ask about the product
ABS pump and control module Toyota C-HR 4451047070 11304041030
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Toyota C-HR - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Toyota C-HR - numbers 44510- 47070 / 4451047070; 113040-41030 / 11304041030. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Toyota C-HR
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Toyota C-HR; it is used, working and in good condition.
Numbers to compare
- 44510- 47070 / 4451047070 - part number (OEM)
- 113040-41030 / 11304041030 - part number (OEM)
Application according to the listing
- Toyota C-HR - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
Compare number 44510- 47070 in full with the number on your pump. Different versions were fitted to the same models, so the number decides the fit, not the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the ABS warning light goes out and comes on by itself,
- the wheels lock under hard braking,
- the tester shows a control module or valve fault,
- traction control switches off.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. Please send any questions about its condition to us before buying. |
| Where can I find the number on the module? |
| You will usually find the numbers on the label or housing of the module, visible after removing it from the car. If you cannot read them, send us a photo. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
Send a photo of your ABS pump or its number to contact@auto24parts.com and we will confirm whether this part will fit.
