A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Toyota Yaris 445100D031 895410D040
Vendors's code: 895410D040
Product code: 445100D031
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
In stock
Ask about the product
ABS pump and control module Toyota Yaris 445100D031 895410D040
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Toyota Yaris - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Toyota Yaris - numbers 44510-0D031 / 445100D031; 89541-0D040 / 895410D040. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Toyota Yaris
Looking for a replacement for a faulty ABS pump for the Toyota Yaris? We offer a used, working unit with electronics in good condition.
Numbers to compare
- 44510-0D031 / 445100D031 - part number (OEM)
- 89541-0D040 / 895410D040 - part number (OEM)
- 06.2102-0746.4 / 06210207464 - ABS pump number (ATE)
- 06.2109-0746.3 / 06210907463 - ABS control module number (ATE)
Application according to the listing
- Toyota Yaris - model
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- the pump motor does not start,
- an unusual noise can be heard when braking,
- brake fluid leaks from the hydraulic unit,
- the brake pedal is hard or sinks.
Compare all the numbers with the label on your pump, because the same car model may have had several versions.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| Does the control module need coding after the pump is replaced? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after the replacement. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
