A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Caddy 2K0614117B 2K0907379B
Vendors's code: 2K0907379B
Product code: 2K0614117B
Barcode:
Code 39:
ISBN:
€182.93
Price
€182.93
€225.00
Price
€225.00
Ask about the product
ABS pump and control module Volkswagen Caddy 2K0614117B 2K0907379B
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Volkswagen Caddy - what to check before buying?
This is a used, working ABS pump with control module for the Volkswagen Caddy - numbers 2K0 614 117 B / 2K0614117B; 2K0 907 379 B / 2K0907379B. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Caddy
This ABS pump with control module is intended for: Volkswagen Caddy (2001-2012). It is a used, working part in good technical condition.
Numbers to compare
- 2K0 614 117 B / 2K0614117B - part number (OEM)
- 2K0 907 379 B / 2K0907379B - part number (OEM)
- 10.0207-0038.4 / 10020700384 - ABS pump number (ATE)
- 10.0970-0312.3 / 10097003123 - ABS control module number (ATE)
Application according to the listing
- Volkswagen Caddy - model
- 2001-2012 - year
- ATE - manufacturer
How an ABS pump with control module works
The valves in the hydraulic block open and close many times per second, and the control module monitors their operation continuously. A failure of any of these parts turns on the ABS warning light.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. The ABS pump is part of the safety system, so it is worth comparing the numbers carefully before buying. A mismatched version may not work with the car's sensors or wiring.
Symptoms of a faulty ABS pump
- the ABS warning light comes on once the car has warmed up,
- the brake pedal vibrates for no reason,
- no communication with the module over the CAN bus,
- the system switches to emergency mode.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
| Do you also sell ABS sensors or connectors? |
| This listing covers only the pump with control module. You will find additional parts in the other categories of the shop, or ask us about availability. |
Not sure? Write to contact@auto24parts.com and we will help you choose the right ABS pump for your car.
