A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volkswagen Sharan 7M0907379 7M0614111K
Vendors's code: 7M0614111K
Product code: 7M0907379
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Volkswagen Sharan - is this the right ABS pump for your car?
This is a used, working ABS pump with control module for the Volkswagen Sharan - numbers 7M0 907 379 / 7M0907379; 7M0 614 111 K / 7M0614111K. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volkswagen Sharan
An ABS pump with electronics helps you keep control of the car during hard braking. The unit offered applies to: Volkswagen Sharan (1995); it is used, working and in good condition.
Numbers to compare
- 7M0 907 379 / 7M0907379 - part number (OEM)
- 7M0 614 111 K / 7M0614111K - part number (OEM)
- 10.0203-0069.4 / 10020300694 - ABS pump number (ATE)
- 10.0945-0301.3 / 10094503013 - ABS control module number (ATE)
Application according to the listing
- Volkswagen Sharan - model
- 1995 - year
- ATE - manufacturer
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model and year alone. The electronics and the hydraulic block are matched to each other, so we treat the listing as a set that should be compared with the original by its numbers.
Symptoms of a faulty ABS pump
- the ABS warning light is on,
- ABS stops working during braking,
- the control module does not communicate with the diagnostic tool,
- sometimes the ESP or traction control light comes on as well.
If the brake system has been opened, it must be bled after fitting, often using a diagnostic tool that controls the ABS valves.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Does the brake fluid need replacing after the pump is fitted? |
| The system has to be bled after the pump is replaced anyway, so it is a good moment to check the fluid and replace it if it is old. |
| Can a pump with a different number fit as well? |
| Sometimes yes, but we do not assume that listings are interchangeable. Compare all the numbers with the label on your pump or ask us. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.