A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Volvo 32384484 32384488
Vendors's code: 32384484
Product code: 32384488
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
In stock
Ask about the product
ABS pump and control module Volvo 32384484 32384488
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Looking for an ABS pump with electronics for the Volvo?
This is a used, working ABS pump with control module for the Volvo - numbers 32384484; 32384488. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Volvo
An ABS pump with control module is one of the key active safety components. This listing applies to: Volvo; the part is used, working and in good condition.
Numbers to compare
- 32384484 - part number (OEM)
- 32384488 - part number (OEM)
Application according to the listing
- Volvo - model
How an ABS pump with control module works
One module contains two parts: the hydraulic block with valves and pump, and the electronics that control them. Both work together within fractions of a second, especially on slippery surfaces.
Matching
For this model we offer several pumps with different numbers. The number on the label decides, not the model name alone. After replacement the module may need coding or adaptation to the car. Check this for your model before ordering the part.
Symptoms of a faulty ABS pump
- the ABS and brake warning lights do not go out after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors work,
- the module overheats or resets.
The brake system is crucial for safety - after replacement, bleed the brakes and have the ABS checked in a workshop.
Questions and answers
| What condition is this part in? |
|---|
| It is a used, working part in good condition. The condition is also given in the product features. |
| What should I check on delivery? |
| Check that the numbers match the description and that the connector, ports and housing show no cracks or signs of corrosion. |
| Why is the number written in several ways? |
| The same number may be written with spaces, hyphens or as one string. We give both forms to make it easier to find. |
Send questions about compatibility to contact@auto24parts.com - state the model, year and the number from the module.
