The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Suzuki Vitara Bosch 5611055PB2 0265257549 0265956509
Vendors's code:
Product code: 98B9-717A2
Barcode:
Code 39:
ISBN:
€325.20
Price
€325.20
€400.00
Price
€400.00
Ask about the product
ABS pump Suzuki Vitara Bosch 5611055PB2 0265257549 0265956509
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 5611055PB2 on an ABS pump mean?
Used ABS pump with control unit, number 5611055PB2, inspected before sale. Matched by the numbers on the block and sticker.
Suzuki Vitara ABS pump: numbers 5611055PB2 and 0265257549
This module is made by Bosch. ABS pump 5611055PB2 is sold together with its control unit, just as it is fitted to Suzuki cars. According to the listing, the pump comes from the Suzuki Vitara model. Markings found on the parts (stamped or printed): 4WD. They help tell the module versions apart, but the full part number is what decides compatibility.
Numbers to compare
You will find the numbers on the labels, while catalogues list them as a single string:
- 56110-55PB2 (catalogue format: 5611055PB2), Suzuki number stamped on the hydraulic block,
- 0 265 257 549 (catalogue format: 0265257549), hydraulic block manufacturer's number,
- 0265956509, control unit number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- the ABS stops working, although basic braking usually remains functional,
- the pump motor switches on at unusual moments or runs louder than usual,
- brake fluid leaks from the hydraulic block, which requires immediate action.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| Where do I find number 5611055PB2 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
