A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Suzuki Grand Vitara 77K0 / 06210218124 06210960003
Vendors's code: 77K0
Product code: 8A72-985CE
Barcode:
Code 39:
ISBN:
1 951,22 zł
Price
1 951,22 zł
2 400,00 zł
Price
2 400,00 zł
Ask about the product
ABS pump and control module Suzuki Grand Vitara 77K0 / 06210218124 06210960003
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump 06210218124 fit your Suzuki?
Used ABS pump with control unit, number 06210218124, inspected before sale. Matched by the numbers on the block and sticker.
How to identify ABS pump 06210218124 for your Suzuki
This module is made by ATE. ABS pump 06210218124 is sold together with its control unit, just as it is fitted to Suzuki cars. The labels show no model or year, so we do not state them here and match the part by its numbers. Markings found on the parts (stamped or printed): 77K0, ESP. They help tell the module versions apart, but the full part number is what decides compatibility.
Numbers to compare
You will find the numbers on the labels, while catalogues list them as a single string:
- 06.2102-1812.4 (catalogue format: 06210218124), hydraulic block manufacturer's number,
- 06.2109-6000.3 (catalogue format: 06210960003), control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
Symptoms of a faulty ABS pump or control unit
- the ABS warning light comes on after the engine is started and stays on,
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| What is the difference between numbers 06210218124 and 06210960003? |
|---|
| One of the numbers is stamped on the hydraulic block, while the other comes from the module manufacturer or from the control unit sticker. When matching the part, compare all the numbers. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| What do the codes 77K0, ESP on the housing mean? |
| They are markings of the module version. They help tell the units apart, but the full part number is what decides compatibility. |
| What condition is this ABS module in? |
| It is an original recycled part in good condition, checked by us. Warranty details are in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
