The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump and control module Audi Bosch 8K0614517CP 0265236197 8K0907379AK 0265951173
Vendors's code: 0265236197
Product code: 8K0614517CP
Barcode:
Code 39:
ISBN:
487,80 zł
Price
487,80 zł
600,00 zł
Price
600,00 zł
Ask about the product
ABS pump and control module Audi Bosch 8K0614517CP 0265236197 8K0907379AK 0265951173
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 8K0614517CP fit your Audi?
Yes, if your assembly has the same number, 8K0 614 517 CP, and control module 8K0 907 379 AK. This is a used, working Bosch unit – we give the VAG pump number from the product data, as it is stamped very faintly into the metal of the block.
8K0614517CP and 8K0907379AK – Bosch ABS/ESP assembly for Audi
This assembly carries markings from two numbering systems. The VAG Group references – 8K0614517CP for the hydraulic unit and 8K0 907 379 AK for the control module – are used for identification in Audi catalogues. The Bosch numbers describe the same components from the manufacturer's point of view: 0 265 236 197 is the hydraulic block, and 0 265 951 173 is the electronic module, whose label also bears the text ‘ESP’.
VAG and Bosch numbers of this unit
- 8K0614517CP – VAG number of the ABS pump (hydraulic unit): 8K0 614 517 CP – from the product data, stamped very faintly into the metal of the block
- 0265236197 – Bosch number of the hydraulic block (pump), written as 0 265 236 197
- 8K0907379AK – VAG number of the ABS/ESP control module, on the control module label: 8K0 907 379 AK
- 0265951173 – Bosch number of the control module, on the control module label: 0 265 951 173
The pump number stamped into the aluminium is barely visible on this block, so the markings on the control module label are the most reliable for comparison. A white barcode sticker has also been applied to the side of the module, facing the pump. We stock many variants of this unit with other letters at the end of the number – make sure yours ends in CP.
Typical signs of an ABS system fault
A faulty assembly usually makes itself known through:
- the ABS warning light on together with the ESP light,
- ABS cutting out during braking,
- a pump fault stored in the control module.
Before deciding on a replacement, it is worth pulling the codes from the control module memory and ruling out cheaper culprits: a wheel sensor, a fuse, a damaged wire or plug, a flat battery. Fitting ends with bleeding the brakes and, on cars with ESP, usually calibrating the steering angle sensor too; coding the module is often required as well.
Frequently asked questions about 8K0614517CP
| Will this part fit my car? |
|---|
| It comes from an Audi, but compatibility is decided by the numbers. Compare the markings of your block and control module with the listing – we do not state the car model. |
| What is the condition of the part and the warranty? |
| The assembly is used and in working order; it is a genuine Bosch component. The warranty period is shown in the product features table. |
| Am I buying the pump together with the control module? |
| Yes. We sell the whole thing: the aluminium block with valves and motor, plus module 8K0 907 379 AK mounted on it. |
| What are Bosch numbers 0 265 236 197 and 0 265 951 173 for? |
| The first identifies the hydraulic block, the second the control module. These are manufacturer's numbers that complement the VAG references but do not replace them. |
If you find the numbers hard to read, take a photo of the block and the control module label or give us your VIN – we will help establish compatibility.
