The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump and control module Audi Volkswagen Bosch 8K0614517DA 0265236188 8K0907379AN 0265951170
Vendors's code:
Product code: A8C9-8643C
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 8K0614517DA fit your Audi or Volkswagen?
Yes, if your hydraulic unit has the same number, 8K0 614 517 DA, and the control module 8K0 907 379 AN. It is a used, working Bosch part fitted to Audis and Volkswagens.
Bosch 8K0614517DA – ABS block with module 8K0907379AN
When the driver presses the pedal hard and one of the wheels starts to lose grip, the control module shuts off the fluid supply to its calliper within a fraction of a second. The valves then release some of the pressure, the wheel turns again, and the pump motor pushes the fluid back into the circuit. This unit repeats the cycle several times a second, which keeps the car controllable during an emergency stop.
All the numbers on this unit
- 8K0614517DA – VAG number of the ABS pump (hydraulic unit), stamped into the block metal: 8K0 614 517 DA
- 0265236188 – Bosch number of the hydraulic block (pump), in the aluminium: 0 265 236 188
- 8K0907379AN – VAG number of the ABS/ESP control module, module label: 8K0 907 379 AN
- 0265951170 – Bosch control module number: 0 265 951 170
The block numbers are stamped into the aluminium (in the photo the pump number is partly obscured by a watermark), while the label marked ‘ESP’ is on the control module housing. The line ports on the block are labelled HZ1, HZ2, VL, VR, HL, HR. Our listing for pump 8K0614517FL has the same Bosch control module number 0 265 951 170, so the VAG block number is what tells the two versions apart.
When to suspect damage to this unit
The most frequent symptoms are:
- the ABS and ESP warning lights on simultaneously,
- ABS not working during braking,
- a pump fault stored in the control module.
Before removing the old part, read the fault codes and inspect the wheel sensors, fuses and control module connector, and measure the battery voltage too. After fitting, the system must be bled, on many cars the module coded and, with ESP, usually a basic setting of the sensors carried out as well.
FAQ – ABS pump 8K0614517DA
| Which makes was this pump fitted to? |
|---|
| Audis and Volkswagens. We do not specify the model, because only the pump and control module numbers confirm the fit. |
| What condition is the part in? |
| Genuine, used and working. The warranty period is shown in the product features table. |
| Can I fit a version with an ending other than DA? |
| Better not – a different letter may mean another version of the system. The safest choice is a unit with the identical number 8K0614517DA. |
| How do I check compatibility before buying? |
| Send us photos of the numbers on the block and the control module label, or your VIN, and we will compare them with this listing. |
Contact us with your VIN or a photo of the block – we will help confirm whether this is your version.