A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Mercedes Bosch A0054319712 0265250111 0265960035
Vendors's code: A0054319712
Product code: 0265250111
Barcode:
Code 39:
ISBN:
2 276,42 zł
Price
2 276,42 zł
2 800,00 zł
Price
2 800,00 zł
Ask about the product
ABS pump Mercedes Bosch A0054319712 0265250111 0265960035
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
When is ABS pump A0054319712 the right choice for your Mercedes?
Used ABS pump with control unit, number A0054319712, inspected before sale. Matched by the numbers on the block and sticker.
Is ABS pump A0054319712 the right part for your Mercedes?
ABS module A0054319712 is used and has been inspected before sale. It is intended for Mercedes cars, but whether it fits is decided by comparing the numbers with the original part in your car. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Where to find the numbers on an ABS pump
The numbers as written on the labels and as a single string, the way catalogues list them:
- A 005 431 97 12 (catalogue format: A0054319712), Mercedes number stamped on the hydraulic block,
- 0 265 250 111 (catalogue format: 0265250111), hydraulic block manufacturer's number,
- 0 265 960 035 (catalogue format: 0265960035), control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
What ABS problems can point to
- the ABS stops working, although basic braking usually remains functional,
- the brake pedal pulses or feels uneven for no obvious reason,
- the pump motor switches on at unusual moments or runs louder than usual,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| Which car model does this pump fit? |
|---|
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Are the make and model of the car enough to choose the part? |
| No. A single model comes with different versions of the module, depending on the engine, year of manufacture and drivetrain. The most reliable reference is the number on the original pump. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
