The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump Chery Tiggo Mando BH60107220 5WY7238B
Vendors's code: BH60107220
Product code: 5WY7238B
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
Ask about the product
ABS pump Chery Tiggo Mando BH60107220 5WY7238B
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump BH60107220 fit your Chery?
Used ABS pump with control unit, number BH60107220, inspected before sale. Matched by the numbers on the block and sticker.
Chery Tiggo ABS pump: numbers BH60107220 and 5WY7238B
This module is made by Mando. ABS pump BH60107220 is sold together with its control unit, just as it is fitted to Chery cars. According to the listing, the pump comes from the Chery Tiggo model. Markings found on the parts (stamped or printed): ABS 2WD. They help tell the module versions apart, but the full part number is what decides compatibility.
Numbers to compare
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- BH60107220, hydraulic block manufacturer's number,
- 5WY7238B, control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
When an ABS module needs replacing
- the ABS stops working, although basic braking usually remains functional,
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
ABS faults should not be ignored, because without anti-lock protection the car brakes less well on wet or slippery roads. Diagnosis and fitting are best left to a garage with a suitable scanner.
Questions and answers
| Are the make and model of the car enough to choose the part? |
|---|
| No. A single model comes with different versions of the module, depending on the engine, year of manufacture and drivetrain. The most reliable reference is the number on the original pump. |
| Do the brakes need bleeding after replacing the module? |
| If the brake lines are disconnected during fitting, the system must be bled. The fault codes in the control unit usually need to be cleared as well. |
| Who makes this module? |
| The module is made by Mando. The manufacturer's name does not change the numbers you should use to match the part. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
