A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Daihatsu Bosch 89540B2190 0265231961 0265800641
Vendors's code: 0265800641
Product code: 89540B2190
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS pump Daihatsu Bosch 89540B2190 0265231961 0265800641
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the Bosch ABS pump 89540B2190 fit your Daihatsu?
Used ABS pump with the numbers 89540B2190 and 0265231961 and control unit 0265800641, checked before sale. Match it using the numbers on the block and the label, as the labels do not show the car model.
ABS pump Daihatsu Bosch 89540B2190 0265231961 with control unit 0265800641
This used ABS pump is a Bosch aluminium hydraulic block with a control unit bolted on from above. The manufacturer's number 0 265 231 961 and the number 89540-B2190 are stamped on the block, and the control unit carries a label with the number 0 265 800 641. The block also shows markings for the brake line connections, including FL, RR, RL and MC2. The labels do not show the car model or year, so it is the part numbers that decide whether it fits, not the Daihatsu make alone.
Numbers to compare
The numbers as written on the labels, and in the compact form without spaces or hyphens that catalogues use:
- 89540-B2190 (compact: 89540B2190), stamped on the hydraulic block,
- 0 265 231 961 (compact: 0265231961), the Bosch manufacturer's number of the hydraulic block,
- 0 265 800 641 (compact: 0265800641), the control unit number from the label.
The code DL101 is also stamped on the block. Compare all three numbers with the original pump in your car, and if any of them differs, contact us before you buy.
Signs of a worn ABS pump or control unit
In modules like this, the most common signs are:
- the ABS warning light comes on after the engine is started and does not go out,
- valve or pump motor faults are stored in the control unit memory,
- the brake pedal pulses or feels uneven when the ABS activates,
- the pump motor starts at unusual moments or sounds louder than usual.
Before buying a module, read the fault codes with a scanner. A faulty wheel speed sensor or its wiring can cause similar symptoms, and replacing the pump will not help in that case. After fitting, the fault codes usually need to be cleared, and the system must be bled if the brake lines were disconnected.
FAQ
| What is the difference between the numbers 89540B2190, 0265231961 and 0265800641? |
|---|
| The number 89540B2190 is stamped on the hydraulic block, 0265231961 is the Bosch manufacturer's number of that block, and 0265800641 is the control unit number from the label. When choosing, compare all three. |
| Which Daihatsu model does this pump fit? |
| The labels do not show a model or year, so we do not state them in the description. Confirm the match using the number on the original pump in your car, or send us a photo of it. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first: the cause can be a wheel speed sensor, its wiring or a low supply voltage. |
| What condition is this pump in? |
| It is a used, original part, checked before sale. You will find the warranty period in the product features table. |
Not sure about compatibility? Send us a photo of the block and the label of your ABS pump showing the numbers, and we will check whether this module will fit.
