A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Daihatsu Sirion M1 4451097201
Vendors's code: 44510-97201
Product code: 4451097201
Barcode:
Code 39:
ISBN:
€162.60
Price
€162.60
€200.00
Price
€200.00
Ask about the product
ABS pump Daihatsu Sirion M1 4451097201
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you tell whether ABS pump 4451097201 fits a Daihatsu Sirion M1?
Used ABS pump with control unit, number 4451097201 (44510-97201). According to the listing data, it comes from a Daihatsu Sirion M1 built in 1998-2005. You can confirm compatibility using the number on the original pump.
ABS pump with control unit 4451097201 for Daihatsu Sirion M1, 1998-2005
According to the listing data, this ABS pump comes from a Daihatsu Sirion M1 built in 1998-2005. It is a used module with an aluminium hydraulic block, a cylindrical pump motor on top and a control unit with a wide connector on the underside. The label shows the number 44510-97201, which appears in catalogues as 4451097201.
Where to find the part number
You will find the part number on the module label and on the control unit sticker. The code DM101 is also stamped on the aluminium block.
- 44510-97201 (compact: 4451097201), the number visible on the module label,
- DM101, the code stamped on the aluminium block.
Compare the number with the original pump in your car. The Sirion M1 model and the years 1998-2005 come from the listing data, and in the end it is the part number that decides whether it fits.
Signs of a faulty module
With ABS modules that have a cylindrical pump motor, the most common signs are:
- an ABS warning light that stays on after the engine is started,
- the ABS not working when braking on a slippery surface,
- fault codes stored in the control unit after the pump motor starts,
- brake fluid leaking from the hydraulic block, which needs immediate attention.
Wheel speed sensors can produce similar symptoms, so read the fault codes with a scanner first. After replacing the module, bleed the brake system and clear the fault codes.
FAQ
| Which car does ABS pump 4451097201 fit? |
|---|
| According to the listing data, a Daihatsu Sirion M1 built in 1998-2005. Confirm the match using the number 44510-97201 on the original pump. |
| Is the number with a hyphen the same as the compact form? |
| Yes, it is the same number. It appears with a hyphen on the label, while catalogues and search engines write it as one continuous string. |
| Are the pump and control unit sold separately? |
| In this listing it is one module: a hydraulic block with the pump and a control unit attached to it. |
| What condition is this pump in? |
| It is a used, original part, checked before sale. You will find the warranty period in the product features table. |
Not sure whether this is the right module? Send us the number from the label of your ABS pump, and we will check whether it will fit your Sirion.
