A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Dodge ATE P05105823AC 25021203114
Vendors's code: P05105823AC
Product code: 25021203114
Barcode:
Code 39:
ISBN:
€203.25
Price
€203.25
€250.00
Price
€250.00
Ask about the product
ABS pump Dodge ATE P05105823AC 25021203114
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number P05105823AC on an ABS pump mean?
Used original ABS module with number P05105823AC for Dodge. Confirm compatibility with the number from your original pump.
How to identify ABS pump P05105823AC for your Dodge
This is a used original ABS pump with a control unit for Dodge cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is P05105823AC, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Part number P05105823AC and related numbers
The numbers as written on the labels and as a single string, the way catalogues list them:
- P05105823AC, original Dodge number,
- 25.0212-0311.4 (catalogue format: 25021203114), hydraulic block manufacturer's number.
Check the numbers on your pump and compare them with those above. If any of them differs, contact us before ordering.
What can point to an ABS pump failure
- the ABS warning light comes on after the engine is started and stays on,
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the ABS warning light comes on together with the stability control warning light.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| Where do I find number P05105823AC on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Which car model does this pump fit? |
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Who makes this module? |
| The module is made by ATE. The manufacturer's name does not change the numbers you should use to match the part. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not sure about the match? Send us a photo of the numbers on your ABS pump and we will check whether this module will fit.
