A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Fiat Stilo Bosch 0265231437 0265800369
Vendors's code: 0265800369
Product code: 0265231437
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump Fiat Stilo Bosch 0265231437 0265800369
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Will ABS pump 0265231437 fit your Fiat?
Used ABS pump with control unit, number 0265231437, inspected before sale. Matched by the numbers on the block and sticker.
Fiat Stilo ABS pump 0265231437: hydraulic module with control unit
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Fiat Stilo cars. You will find number 0265231437 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Fiat Stilo model.
Part number 0265231437 and related numbers
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- 0 265 231 437 (catalogue format: 0265231437), hydraulic block manufacturer's number,
- 0 265 800 369 (catalogue format: 0265800369), control unit number.
Compare the numbers with the original pump in your car, and if any of them differs, write to us before buying.
When an ABS module needs replacing
- valve or pump motor faults are stored in the control unit memory,
- the ABS activates for no reason during normal braking,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- on a slippery surface the wheels lock up noticeably sooner than they used to.
Before buying a module, read the fault codes with a diagnostic tester. A faulty wheel speed sensor or its wiring can cause the same symptoms, and in that case replacing the pump will not help. After replacement the fault codes usually need to be cleared, and if the brake lines have been disconnected, the system must be bled.
Questions and answers
| Where do I find number 0265231437 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Are the pump and the control unit sold separately? |
| In this listing they are a single module: a hydraulic block with the pump and valves, with the control unit attached to it. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Want to check before you buy? Send a photo of the block and sticker on your ABS pump and we will check that the numbers match.
